L leonel New Member Sep 13, 2006 #1 I have surge problems in my input. If I put 2kV pulses at 1.2us in the circuit attatched my microcontroller goes "crazy". What do you suggest to do to prevent surge problems using my circuit? Attachments Comando.JPG 66.8 KB · Views: 298
I have surge problems in my input. If I put 2kV pulses at 1.2us in the circuit attatched my microcontroller goes "crazy". What do you suggest to do to prevent surge problems using my circuit?
Nigel Goodwin Super Moderator Most Helpful Member Sep 13, 2006 #2 If I stuck a 2KV pulse up you, you'd go crazy as well But for any advice you need to post the entire circuit, and the source of the pulses.
If I stuck a 2KV pulse up you, you'd go crazy as well But for any advice you need to post the entire circuit, and the source of the pulses.
L leonel New Member Sep 13, 2006 #3 The all schematic. My pulses sources comes from an MIG (Modular Impulse Generator). I thought to put a VDR between my inputs, but it's enough? Attachments Esquema.pdf Esquema.pdf 152.6 KB · Views: 289
The all schematic. My pulses sources comes from an MIG (Modular Impulse Generator). I thought to put a VDR between my inputs, but it's enough?