stereo input ADC

hi all!!
i want to convert the output of the microphone using dspic through stereo jack. I'm using mikro C pro for dspic. in stereo jack there are 3 pins. i have to convert both left and right pins to take the clear voice from microphone? how can i do this? please help me to ADC conversion.

dspi = dspic30f3011

thank you

You do not stereo (both left and right). Most microphones (such as used for Skype) are monaural.

MikeMl said:

You do not stereo (both left and right). Most microphones (such as used for Skype) are monaural.

Click to expand...

i'm doing noise suppression and communication. I have headphone with microphone. Things that i talk through mic should transfer to dspic through stereo jack and send it through bluetooth to the other person who have same device like mine. So I'm stuck in the my voice transferring to dspic part.

I have an idea of how to make analog circuit between stereo jack and dspic using voltage dividers but i have no idea about how to ADC the output of the microphone. please help me.

Again, mikes (even noise cancelling) are generally mono) - but to A2D a stereo signal you do them sequentially in turn (so left, then right and so on).

The mic output signal(s) will need amplification before being fed to the dspic's analog input.

alec_t said:

The mic output signal(s) will need amplification before being fed to the dspic's analog input.

Click to expand...

Obviously, but that's a VERY minor concern.