Hopefully this isn't a repost.
I want to build a square wave inverter that steps up the voltage by a factor of 10 and runs at 1000 Hz. I'm hoping someone knows of a good and simple schematic. The numbers don't need to be exactly the same because I could modify the design. I'm not looking for a lot of power -- 10W peak or less will probably be fine (probably less than 1W needed).
You could just use a design for 50Hz and up it to 1kHz but you'll need to change the transformer as a mains transforer probably won't cut it, a 100V audio trainsformer might be ideal.
Since you want 1-10 watts at 120V 1kHz, I would suggest you check **broken link removed** and see if it gives you any useful ideas. There's a little bit more info **broken link removed**.
Why bother posting a fuzzy schematic? It is so blurry that it can't be seen.
The problem is because you saved it as a JPG file type instead of a very clear GIF or PNG file type.