Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

some question about programming

Status
Not open for further replies.

watson

New Member
hello

im a begginer, i have some questions about constructing a proggramer

is it safe to use the pc power supply 12/5 v. is there a good way to get a steady power supply from the serial port.

where can i find a simple in circuit proggramer for the 16f877 or 16f628

thanks in advance
 
i use this one for pic16f628:
 

Attachments

  • pic-pg1-sch.gif
    pic-pg1-sch.gif
    8.3 KB · Views: 561
thanks a lot for your answer

i just have one question

what is the icsp symbol (is it the pic) and what is it the use of pins 1 t0 6
 
ICSP = in-circuit serial programming (i think)

connect pin 1 to the pin 4 of the PIC
pin 2 to pin 14 of PIC
pin 3 to GND
pin 4 to pin 13 of PIC
pin 5 to pin 12 of PIC
pin 6 to pin 10 of PIC
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top