G gwizzz New Member Oct 5, 2022 #1 Would anybody be able to help in identifying this component Attachments PXL_20221001_110406298~2.jpg 27.8 KB · Views: 186
Nigel Goodwin Super Moderator Most Helpful Member Oct 5, 2022 #2 Probably not, as the picture shows very little, other than the numbers on it - post some better pictures. Upvote 0 Downvote
Probably not, as the picture shows very little, other than the numbers on it - post some better pictures.
MaxHeadRoom78 Well-Known Member Most Helpful Member Oct 5, 2022 #4 By the apparent size of the conductors, it is made to carry some current. Looks very much like a MOV? Heat sensor? Where did it come from? Upvote 0 Downvote
By the apparent size of the conductors, it is made to carry some current. Looks very much like a MOV? Heat sensor? Where did it come from?
rjenkinsgb Well-Known Member Most Helpful Member Oct 5, 2022 #6 A "Thermik" SK1 series 110'C thermal switch: Thermal Protector SK1 | Type series K1 | Thermik Gerätebau Thermal Protector SK1 from Thermik – Power class: 1,6 A to 7,5 A | normally closed | resets automatically | with connector cables | Mylar®-Nomex® www.thermik.de It's a self-resetting thermal cutout or thermostat. Upvote 0 Downvote
A "Thermik" SK1 series 110'C thermal switch: Thermal Protector SK1 | Type series K1 | Thermik Gerätebau Thermal Protector SK1 from Thermik – Power class: 1,6 A to 7,5 A | normally closed | resets automatically | with connector cables | Mylar®-Nomex® www.thermik.de It's a self-resetting thermal cutout or thermostat.