I have a 741 chip that came in an 8 pin SOIC. I cannot use a DIP version because I need the entire circuit to be flat. I am looking for a breakout board that I can use to build a non-inverting amplifier.
Does anyone know a good place where I can buy one from the USA?
When evaluating with SMD components, I build everything on a copper clad board and mount the chip upside down, then wire to it this way. It is still fiddly, but can be done and the performance of it far exceeds anything with strip board
When evaluating with SMD components, I build everything on a copper clad board and mount the chip upside down, then wire to it this way. It is still fiddly, but can be done and the performance of it far exceeds anything with strip board