For many four wire pullchains:
L - Black, 1 - Grey, 2 - Brown, 3 - Purple
L - Orange, 1 - Black, 2 - Yellow, 3 - Purple
L - Black, 1 - Grey, 2 - Brown, 3 - Green
L - Grey, 1 - Yellow, 2 - Purple, 3 - Black
L - White, 1- Black, 2 - Blue, 3 - Yellow
There is a common wire, usually the black one. You can easily test this by using the continuity setting on a multi meter. The common wire will create a connected circuit to each of the other three wires (if the black wire doesn't work, it is possible one of the other wires is the common--you may have to try more than one).
A yellow and the brown don't look right.
Can you write down what is on the capacitor. Need to see the caps and values. e.g. ------| |------
3uf
and the colors.
And if possible, the resistances of the motor windings. It might be tough to do.
9
Y ------||-------|
1.5 |
B ------||------------- BK
|_---_| |
--- |
1.5 |
B ------||--------
|_---_|
---
Pull chain switch for lights:
3A 125V "L"
3A 250V AC.
6A 125V AC.
E87438-303A
Pull chain switch for fan:
MAX. 3A-250 VAC
MAX. 6A-125 VAC
Des. Pat. No. 1036664
E87438-
308-A
Model 3089TB:
Position Circuit
1 OFF
2 3-L-1-2
3 3-L-2
4 3-L-1
Model 3089TG:
Position Circuit
1 OFF
2 2-L-1
3 2-3-1
4 2-3
This is the switching sequence for the KTE pull chain switch.
Pos. 1 Pos. 2 Pos. 3 Pos. 4
L → 1 ! L → 1 x L → 1 x L → 1 x
L → 2 ! L → 2 x L → 2 x L → 2 x
L → 3 x L → 3 x L → 3 x L → 3 x
1 → L ! 1 → L x 1 → L x 1 → L x
1 → 2 ! 1 → 2 ! 1 → 2 x 1 → 2 x
1 → 3 x 1 → 3 ! 1 → 3 x 1 → 3 !
2 → L ! 2 → L x 2 → L x 2 → L x
2 → 1 ! 2 → 1 ! 2 → 1 x 2 → 1 x
2 → 3 x 2 → 3 ! 2 → 3 ! 2 → 3 x
3 → L x 3 → L x 3 → L x 3 → L x
3 → 1 x 3 → 1 ! 3 → 1 x 3 → 1 !
3 → 2 x 3 → 2 ! 3 → 2 ! 3 → 2 x
The exclamation mark indicates continuity/connection.
The X indicates no connection.
This is the switching sequence for the old HITCO pull chain switch.
Pos. 1 Pos. 2 Pos. 3 Pos. 4
L → 1 x L → 1 x L → 1 ! L → 1 x
L → 2 x L → 2 x L → 2 ! L → 2 x
L → 3 x L → 3 x L → 3 x L → 3 x
1 → L x 1 → L x 1 → L ! 1 → L x
1 → 2 x 1 → 2 ! 1 → 2 ! 1 → 2 x
1 → 3 x 1 → 3 ! 1 → 3 x 1 → 3 !
2 → L x 2 → L x 2 → L ! 2 → L x
2 → 1 x 2 → 1 ! 2 → 1 ! 2 → 1 x
2 → 3 ! 2 → 3 ! 2 → 3 x 2 → 3 x
3 → L x 3 → L x 3 → L x 3 → L x
3 → 1 x 3 → 1 ! 3 → 1 x 3 → 1 !
3 → 2 ! 3 → 2 ! 3 → 2 x 3 → 2 x
Conducting terminals...
2-3,3-2 1-2,1-3, L-1,L-2, 1-3,3-1
2-1,2-3, 1-L,1-2,
3-1,3-2 2-L,2-1
Old switch (HITCO) New switch (KTE)
Pos 1. L-1-2 L-1-2
Pos 2. 1-3 1-2-3
Pos 3. 2-3 2-3
Pos 4. 1-2-3 1-3
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?