Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Repair Resources and Learning

Status
Not open for further replies.

ElectroMaster

Administrator
Last edited:
The biggest mistake in the video is this:
He knew it was a PNP transistor.
In most cases you do not know if the transitor is PNP or NPN and this video is worthless.
<snip: spam>
 
Last edited by a moderator:
Identifying Base, Emitter, Collector, and Type for a Bipolar Junction Transistor
https://www.youtube.com/watch?v=Sgm_ru7aF8w

This is very bad video because it does not tell the viewer that the multimeter needs to have a 9v battery inside the meter to provide a "break-down" voltage for the transistor to break-down when reading the collector-emitter / emitter-collector leads.
Any multimeter with a 1.5v or 3v battery will not work.
To get a cheap multimeter to work, you need to add a 9v battery to one of the leads and try the transistor. If you don't get a reading, reverse the battery.

And, surprise, surprise, he does not allow comments on his video.
 
Last edited:
The biggest mistake in the video is this:
He knew it was a PNP transistor.
In most cases you do not know if the transitor is PNP or NPN and this video is worthless.
See TalkingElectronics.com site for a video that does not assume PNP or NPN and you work out the type of transistor via a few simple steps and stages.

Colin i looked on your web site, where was the video?
 
Video, transistor

Collin, Collin, Collin ......you should know that any component that starts with a letter A or B is a PNP transistor, as in a 2SA733. If it is a NPN transistor, C or D. For example, it would be a 2SC945. The No. Stamped on the component will start most of the time with a letter. The No. 2 stands for dual junction semiconductor.
 
Status
Not open for further replies.

Latest threads

Back
Top