i have a rF rx u2270b which is a receiver for rf, we designed the circuit according to pdf and application note but not able read. will you suggest me how to proceed with this
i have a rF rx u2270b which is a receiver for rf, we designed the circuit according to pdf and application note but not able read. will you suggest me how to proceed with this
With this sort of application you have two potential problems, either the hardware or the software. Your first task is to try and identify which is the problem!.
As it works at low frequency you should be able to use a scope to help you see what's happening, as with any fault finding you need to have a good idea of how it works, and what should be happening at various points.