Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Recommandation of ARM MCU - HELP

Status
Not open for further replies.

roye

New Member
Hello all.
I'm new to this wonderful forum, it's very exiting to see such an active forum for MCU's like this
I have a tech q: i'm looking for an ARM based MCU for System Control, that would have the following peripherals:
4 A/D Converters and 2 D/A Converters, each one with at least 12 bit, and a sampling frequency greater than 150 kHz.
it is very important that the CPU core would be ARM based.

I would really appreciate any help, even in the form of a website that would with a list of all the available MCU's in the market, since I haven't found anything like that yet.

Thanks a lot,
Roy E.
 
I did not look for details to see if these will work. I am saying that if you get a MCU it is hard to get started. So get a "board" will all the parts. Getting started is much faster.
https://www.sparkfun.com/products/13736
https://www.sparkfun.com/products/11589
https://www.sparkfun.com/products/14058
https://www.sparkfun.com/products/9564
If you were at my house I could give you one of these:
upload_2017-8-16_6-26-39.png
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top