really need help.

hello.
i know nothing about programming but i need to use it in my project.
my project will use a clock as a pulse to the 3 digit counter circuit but my problem is i need to multiple the single pulse with 5 so my output will be more bigger. example the normal output is 100, after program will be 500.
anybody can help me to create@search the multiple program with 3 digit counter circuit.

I can probably write up a program for you and give you the hex. Are you able to program the uC, which uC?

If all you want the program to do is output 5 pulses when it receives 1, you can achieve this using an oscillator and counter chip (e.g. a 555 & a 4017)

birdman0_o i will try but it is more better to get a program in pic.

Well, using dougys Idea, your pulse could trigger a 555 for the duration of 5 pulses. Is the signal continuous or it just a burst. What will the typical input # be?

It will probably be impossible to find a preprogrammed PIC with this characteristic. Perhaps find somebody who lives in Malaysia who would do this for you.