Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Question i-nears headphones magnetic drivers

Status
Not open for further replies.

and77man

Member
In-Ears headphones use magnetic dynamic drivers. If you bring the in-ears close to an electronic device that releases magnetism with a 29" CRT TV (coils, speaker) turned on, will this TV cause demagnetization or permanent loss of performance of these in-ear drivers?
 
how much intensity would it need to damage the magnetic dynamic drivers of the In-Ears? I have KZ EDX Pro and KZ EDC Pro
Unless you know the magnetic coercivity of your ear-phones it's impossible to say. Good luck getting that info from the makers.
 
how much intensity would it need to damage the magnetic dynamic drivers of the In-Ears? I have KZ EDX Pro and KZ EDC Pro
Nothing short of putting them in some very specialised, extremely high power degaussing or remagnetising machine, or possibly an MRI machine, would have any effect.

I've just tried a small neodymium magnet directly on an AC mains powered degausser I use for watch repair - absolutely no effect.
(Other than it launching itself off the first time; I had to hold it in place, hard!).
 
Are the dual magnetic dynamic drivers of these in-ears very resistant to demagnetization and magnetic losses unlike 2.5" HDDs? To demagnetize or have magnetic losses of these dual magnetic drivers of these in-ear headphones, what power would be necessary? And what power does a 29" CRT have because it has coils and speakers?
 
To demagnetize or have magnetic losses of these dual magnetic drivers of these in-ear headphones, what power would be necessary?
See posts 4 and 5.
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top