Im planning on using omron g2rk-1 it only comes single pole, 2 way, nc or no. Im not sure if the module drives the mirrors (acesdvds qashqai mirror kit) but all i need is to block the central locking trigger to the module, so it does not fold the mirrors. I could of just put a switch in-line of the central locking trigger but i want it all to look original from the outside. So as it is i just need to correspond the right switch wire with the right coil. I know the coil needs a minimum pulse of 30ms so i will work out the capacitor and then i will buy/gather the parts and try it on the bread board. Thanks for your help Les il give u an update once i got it going. Thanks again!