**broken link removed**
the lm3916 is slightly messed up in the program
it did not have 18 pin chip
this is two halfs of my project
induvidually the both work but
joining together im having problems
when nothing is connectted to pin 5 all leds are on
when pin 5 is connect to ground all led are off
when pin 5 is connected to top half of the output pins (one above capacitor) all leds are on
when pin 5 is connected to bottom of output pins below cap all leds off
when a 20k resistor is attached to pin 5 to ground
when nothing is connectted to pin 5 all leds are off
when pin 5 is connect to ground all led are off
when pin 5 is connected to top half of the output pins (one above capacitor) all leds are on
when pin 5 is connected to bottom of output pins below cap all leds off
can someone guide me in the correct direction to get this thing working
the lm3916 is slightly messed up in the program
it did not have 18 pin chip
this is two halfs of my project
induvidually the both work but
joining together im having problems
when nothing is connectted to pin 5 all leds are on
when pin 5 is connect to ground all led are off
when pin 5 is connected to top half of the output pins (one above capacitor) all leds are on
when pin 5 is connected to bottom of output pins below cap all leds off
when a 20k resistor is attached to pin 5 to ground
when nothing is connectted to pin 5 all leds are off
when pin 5 is connect to ground all led are off
when pin 5 is connected to top half of the output pins (one above capacitor) all leds are on
when pin 5 is connected to bottom of output pins below cap all leds off
can someone guide me in the correct direction to get this thing working