programmer please help

[Lilikin]

onboard programming

i need to get a schematic for a custom veroboard pic programming board the one i need is gone and i have no time for another so i need a board to programming some pics i have good componet supplies here are my pics

any ideas i am using the pic16f877a and the 628

but just the 877a would be great beg beg

 

[William At MyBlueRoom]

Ebay has tonns of ICD2 clones, all support ICP programming.
A common ICD/ICP for a PIC 16F877 pinout is

1 VPP (/mclr)
2 +5
3 GND
4 PGD (RB7)
5 PGC (RB6)

Take a look at J6 on the Ladybug schematic on my web site.

 

[Lilikin]

so i just put pin1 vpp
2 plus 5 volts
3 grounded
4 and 5 how do i connect that to my computer

 

[William At MyBlueRoom]

so i just put pin1 vpp
2 plus 5 volts
3 grounded
4 and 5 how do i connect that to my computer

You still need a programmer, Look for an ICD2 or if you want to build it yourself there are lots of PIC programmers out there.

https://www.rentron.com/Myke4.htm