Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

problem regarding l293d

Status
Not open for further replies.

dhruvrajpant

New Member
ive used a l293d ic to run a single motor.....but its not working.
my question is that ive provided same voltage(5v) to the enable pin<pin 1>,Vs pin<pin 8>,and the input pin<pin 2>(for logic 1) n connected pin 7 to the grd, but it's not working.
 
aaaa.png

may be this will help
 
z1...z4 are the inputs and the jacks J are the motor o/ps
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top