Power boosting... draining issue

Status
Not open for further replies.

DBR01

New Member
Ok so without going into lengthy detail about the circuit, I'm trying to make my circuit boost the input power. After having problems with the power draining instead of boosting, I figured out that I had the diodes all backwards, After flipping them all around the power is still draining but very slowly. So I'm very taken back by this and i'm sure its something silly so here is my diagram, please don't laugh too hard when u figure it out lol
 

Attachments

  • My Circuit.jpg
    201.9 KB · Views: 149
The Laws of Thermodynamics guarantee that you cannot boost "POWER"; you can boost voltage (thereby reducing current); or you can boost current (thereby reducing voltage).

Now, within that constraint, what are you trying to get your circuit to do?
 
Ok, a capacitor charges only once from a dc source and the current through the capacitor goes to zero. Unless something discharges the capacitor, you need a "chopper" to create alternating cycles of charging/discharging. This is done by using an oscillator circuit. Google "Switch Mode Power Supply", "SMPS" or "Boost converter".
 
Wow, did a quick google on Switch Mode Power Supply and got lots of info. I'll be reading for a while... Thanks Mike!!!
 
Status
Not open for further replies.
Cookies are required to use this site. You must accept them to continue using the site. Learn more…