Posting Schematics made with Eagle

Hello, everyone!
I'm not sure if this is the right category for this post, but I hope it's ok.
I recently got the Eagle schematic drawing software on my computer, but I'm having a little trouble getting my schematics to post on this forum. Can someone walk me through how to do this? So far, I've mostly been trying to use the attachments option to upload the schematic from my desktop, but it only posts links that, most often, don't even work. What am I doing wrong?
Thanks in advance!
Der Strom

With your schematic page open click File --->Export---->image then you have a image that you can post.

Mikebits said:

With your schematic page open click File --->Export---->image then you have a image that you can post.

Click to expand...

Thanks, Mike! That helps a lot!

Or export a PDF, which is much more readable for complicated circuits. You can do this by printing to PDF from the menu.

Mikebits said:

With your schematic page open click File --->Export---->image then you have a image that you can post.

Click to expand...

... with lousy image quality (BMP format). Better yet exporting the schematic as PDF file.

Boncuk