P pixman Member Feb 21, 2011 #1 Hi TO ALL I HAVE JUST GOT A PICKIT 3 AND I AM HAVING PROBLEMS CONNECTING TO IT IN MPLAB. WHEN I WRITE A PROGRAM TO A PIC16F767 IT FAIL'S. IT WILL NOT ENTER IN DEBUGGER MODE. I TRIED MY PICKIT 2 AND IT WORKS FINE. THANKS DAVID
Hi TO ALL I HAVE JUST GOT A PICKIT 3 AND I AM HAVING PROBLEMS CONNECTING TO IT IN MPLAB. WHEN I WRITE A PROGRAM TO A PIC16F767 IT FAIL'S. IT WILL NOT ENTER IN DEBUGGER MODE. I TRIED MY PICKIT 2 AND IT WORKS FINE. THANKS DAVID
P Pommie Well-Known Member Most Helpful Member Feb 21, 2011 #2 Have you checked what resources the PK3 needs? Mike.
P pixman Member Feb 22, 2011 #3 Yes, all that is fine. It will read a program from a pic but does not program or enter into debugger mode.
Yes, all that is fine. It will read a program from a pic but does not program or enter into debugger mode.
P pixman Member Feb 22, 2011 #4 Could it be the icsp cable that i am using. I have kept the leds short +-15cm.
blueroomelectronics Well-Known Member Feb 22, 2011 #5 The PICkits are designed to connect directly to a header on the target PCB without a cable. That said 6" should be fine. Last edited: Feb 22, 2011
The PICkits are designed to connect directly to a header on the target PCB without a cable. That said 6" should be fine.
B bryan Member Feb 22, 2011 #6 Does the PK3 not need a upload of different firmware for each family of pics ie 16f, 18f etc that you are programming
Does the PK3 not need a upload of different firmware for each family of pics ie 16f, 18f etc that you are programming
blueroomelectronics Well-Known Member Feb 22, 2011 #7 bryan said: Does the PK3 not need a upload of different firmware for each family of pics ie 16f, 18f etc that you are programming Click to expand... It does and it should do it automatically.
bryan said: Does the PK3 not need a upload of different firmware for each family of pics ie 16f, 18f etc that you are programming Click to expand... It does and it should do it automatically.
P pixman Member Feb 22, 2011 #8 Thanks for the help. I found a problem with the cable i am using. Made another one last night and all is working now.
Thanks for the help. I found a problem with the cable i am using. Made another one last night and all is working now.