sorry for the explanation, let me put it tis way, i wan my PIC to supplied 5V(high) to a single pin(for example PORTC.0) so shud my program write tis way?
sorry for the explanation, let me put it tis way, i wan my PIC to supplied 5V(high) to a single pin(for example PORTC.0) so shud my program write tis way?
hi,
Checking an osc is not easy without an oscilloscope, you could try another crystal. Do you have any low vlue capacitors connected from the xtal pins to 0V.?
If you are using a prototype board, sometimes the xtal will not oscillate.
The PICbasic program you have posted should set the PORT pin.
As ALLVOL has suggested are you sure the prommer is writing the program to the PIC.?