when i run my simulation of circuit Proteus Isis it give me the following warning message. Please can somebody help me with This. the full description of simulation result is given in the file below.
i downloaded it and it works ok or seems to, the type of warnings its throwing up could mean you have the wrong clock settings for the chip your using, some of the other warnings are just proteus not being able to use that setting. but apart from that it seems to work ok
but when i built the circuit on breadborad, it does not give me the output. i mean does not light up the LED and also no temperature display on LCD? Please help with this as i am stuck in it and cannot go forwared. and second how can i change the clock setting for my microcontroller?
i dont have any experiance with that kind of LCD but i noticed you dont have a pot on it to vary the intensity. are you using the same type of LCD in the real circuit? you will need to find out if you have to connect a pot to it. as for the clock setting it dosnt appear you have any clock setting in your code, you will need to read the datasheet as i dont use 16f chips sorry