Hi,
i have made a small testboard to test my programming whit a led and powermosfet and offcourse a switch.
i have connected the 2VDD and VSS to + and - (including a small capp)
and the MCLR whit a res (1K),
offcourse also the extern Crys(20Mhz) whit 2 33pF's (capp)
my problem is how can i test if my setup is working and the pic is working well.
The pic works fine//my programmer van program it fine..
========================================
2:
I write my code in ASM in textpad...
then i compile it whit the MPLAB ASM compiler...
but when i start to program my programmer software say's
it cant fine the fuse settings etc..
how can i include them in my asm file..???
=======================================
3:
some times i see asm file whit somethingl ike
include picxx.xxx like including a file or something
i would like some moreinformation about that...
=========================================
last one:
i aslo connected to the same board a 20pin socket for my 16F818's...
but i cant find the speed @ which the internet clock works can anyone help..??
the problem i have and maybe much other beginners is how to read the datasheets?? where is the information...
i'm sure the profs overhere have a nose for it and know where to look @..
well
Tanxs anyone who helps me...
TKS :wink:
i have made a small testboard to test my programming whit a led and powermosfet and offcourse a switch.
i have connected the 2VDD and VSS to + and - (including a small capp)
and the MCLR whit a res (1K),
offcourse also the extern Crys(20Mhz) whit 2 33pF's (capp)
my problem is how can i test if my setup is working and the pic is working well.
The pic works fine//my programmer van program it fine..
========================================
2:
I write my code in ASM in textpad...
then i compile it whit the MPLAB ASM compiler...
but when i start to program my programmer software say's
it cant fine the fuse settings etc..
how can i include them in my asm file..???
=======================================
3:
some times i see asm file whit somethingl ike
include picxx.xxx like including a file or something
i would like some moreinformation about that...
=========================================
last one:
i aslo connected to the same board a 20pin socket for my 16F818's...
but i cant find the speed @ which the internet clock works can anyone help..??
the problem i have and maybe much other beginners is how to read the datasheets?? where is the information...
i'm sure the profs overhere have a nose for it and know where to look @..
well
Tanxs anyone who helps me...
TKS :wink: