manoj soorya
Member
Hello All
I download a proteus 7.5 .DSN file for a 12F675 Timer. It has one input switch and one LED in the output. I already have the hex code. Not the source code..
My hex file is works like:-
1. Power on the System the LED will ON.
2. When press the switch, LED will OFF.
3. If switch is pressed, The LED will OFF
4. If the switch is relese, The LED will ON for 5 Seconds and turn OFF.
In my needs, only change in the first state. ie, Power on the System the LED will be OFF.
any help would be appriciated.... Thank you so much
I download a proteus 7.5 .DSN file for a 12F675 Timer. It has one input switch and one LED in the output. I already have the hex code. Not the source code..
My hex file is works like:-
1. Power on the System the LED will ON.
2. When press the switch, LED will OFF.
3. If switch is pressed, The LED will OFF
4. If the switch is relese, The LED will ON for 5 Seconds and turn OFF.
In my needs, only change in the first state. ie, Power on the System the LED will be OFF.
any help would be appriciated.... Thank you so much