Would this help you?
View attachment 14755
It's really quite simple. To see it from a different view:
-One switch is depressed 36 times, giving pulses to a "processor".
-A 7seg display is counting the pulses
-At the pulse#3 Relay 1 is activated
-At the pulse#33 Relay 2 is activated
-At the pulse#36 Relay 3 is activated - to stop the sequence
Than, a reset switch should reset the "processor" and the 2digit seven segment, and also give a pulse to the 3digit 7seg, that should count +1 for each sequence performed.
Anders