PIC- 16F886 LP oscillator issue

Hi all:
I am attempting to simulate a INTOSC , 8Mhz clocked 16f886 with a secondary 'counter' LP oscillator in ISIS 7.10....
Now from section 6.4 of the datasheet.
https://ww1.microchip.com/downloads/en/DeviceDoc/41291F.pdf
It seems that Timer 1 can count 32768 Hz independently of the Internal Clock once TRISC0,1 are hi and T1OSCEN is set.
Well I can't get TMR1L/H to count this internal LP clock pulses at all...but IF I input a 32768 pulse into T1ck1...it happily counts.
Placing a 32768 crystal and 12pF caps to gnd on the T1OSO,T1OSI inputs makes no difference.

Any help is appreciated.
It seems I might have to add additional circuity to get a 32.768 Khz signal.

You are correct. ISIS does specify that it doesn't simulate oscillators... This is why a micro runs without it.

Placing the clock on the T1CK pin is the only way to do it..