Pic 16f877a

Dears,

I was first preparing the microcontroller board, when i put the PIC 16F877A just reversing it in zif socket, Which ended up Causing the plate to stay "beeping." Now That I put right after it Does Not Recognize the pic, the pic is it burned?

That is why the card driver is incorrect?

Sorry if my English is not good

Yep!!! Done that sooooo many times.... It also knackers it if you slightly miss-align ie pin 40 and 1 into pin 39 and 2..

Also.... This is the Intel section... The main micro controller forum is PIC biased