It's not clear in the documentation that if you have the comparator config register set up to enable only one of the two comparators, whether the unused I/O pins can be used for regular digital I/O functions.
For example, if I set CMCON=0x05 then comparator 1 is disabled and comparator 2 is enabled. I would like to use RA0 and RA3 (otherwise assigned to comparator 1) as digital I/O. Is this possible?
For example, if I set CMCON=0x05 then comparator 1 is disabled and comparator 2 is enabled. I would like to use RA0 and RA3 (otherwise assigned to comparator 1) as digital I/O. Is this possible?