numberonekiwi
New Member
I have a SMPS that I am going to use for a desktop power supply it delivers around 40 Amps on the +12v and +5v rails powering up the unit is easy by grounding the ps on wire ( green )
The problem is however that the 12v rail is only 11.2 volts. The 5v is 5.02 v so this is ok.
Is there an easy way to pull the 12v rail back up to 12v or even 13.8v
The problem is however that the 12v rail is only 11.2 volts. The 5v is 5.02 v so this is ok.
Is there an easy way to pull the 12v rail back up to 12v or even 13.8v