Oshonsoft

Does anybody know how to play around with Vref for the ADC module with Oshonsoft?

G'day Boo,
First have you the analogue external module off Eric's blog? If so it's easy to set the Vref as the module has a window for setting it. If you don't then just set the pin on the micro to analogue and set the voltage you want to the pin. In my opnion the best part about the Oshonsoft Basic is the simulation part where the external modules simulate the hardware. With my charge controller project trying to set the trip points for high and low voltage would be fun without the external modules.

Cheers Bryan