Hi again,
Very good Jason. And if you use the formula i gave you get 0.27587 vpp for a 0.1 vpp input, so the results agree. That's also assuming ideal op amps.
One extra small note here:
If the frequency gets near the resonate frequency it could overload the output of the op amp because at the resonate frequency the reactance of the cap and inductor cancel out making those two zero ohms, and so we then have a 10 ohm resistor connected from the output of the first op amp to ground. With 1.1v output that would mean 110ma of current to ground and that would be too high for the op amp.