spinnaker
Member
I have two displays doing the same thing. I it appears to be a contrast issue. Below is the best I can get the contrast adjusted. Notice how part of the P and part of the M appear to be washed out and there are artifacts all over the screen.
I have never had this problem before and think I have used 10k trimmers in the past.
I am using a 10K single turn trimmer. Considering swapping it out for something larger but before I do I wanted to run it by others first.
J2 is the LCD display.
I have never had this problem before and think I have used 10k trimmers in the past.
I am using a 10K single turn trimmer. Considering swapping it out for something larger but before I do I wanted to run it by others first.
J2 is the LCD display.
Last edited by a moderator: