SpeakerGuy: I thought that I'd test the 0805's that I have to see if they can take 1/10Watts and if so, how hot they'd get.
I took a 220Ohm resistor (Measured at 219.2Ohms) and applied 4.68V using my Atlas LCR meter's SMD Tweezers. (Calculated to be as near as damnit to 0.1Watts) The resistor didn't get warm to touch at all.
Just thought I'd mention this to anyone and also so that you know they don't heat at full power.
Do you use any 1206 resistors ? If so, what power rating are they ?
Thanks.