blueroomelectronics
Well-Known Member
Thank you Omar, now the parts placement looks ok, I'll start routing the PCB (no autorouter, all by hand)
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
blueroomelectronics said:And here's the Junebug in 3D
**broken link removed**
alamy said:I love it... Excellent...
Always dream to build in 3D prototype..how long u take to build this 3D?
Good idea, I'll add themMike said:Could you maybe put pads under that dip switch so that we have the option of using 0.1 inch headers and jumpers instead of an expensive DIP switch, please?
> Serial EEPROM support:
24LC I2C bus devices:
Bus Speed-
400kHz with Tools -> Fast Programming checked
100kHz with Tools -> Fast Programming unchecked
NOTE: Bus pullups are required for all
programming operations. 400kHz requires
2k Ohm pullups.
Ax Chip Select checkboxes-
These are only enabled for devices that support
address chip selects, and allow programming of
multiple devices on the same bus.
Connections for 24LC devices
---------------------------------------
PICkit 2 Pin 24LC Device Pin (DIP)
(2) Vdd 8 Vcc
(3) GND 4 Vss
(5) PGC 6 SCL (driven as push-pull)
(6) AUX 5 SDA (requires pullup)
7 WP - disabled (GND)
1, 2, 3 Ax pins
Connect to Vdd or GND per
datasheet and to set address
25LC SPI bus devices:
Bus Speed-
~925kHz with Tools -> Fast Programming checked
~245kHz with Tools -> Fast Programming unchecked
Connections for 25LC devices
---------------------------------------
PICkit 2 Pin 25LC Device Pin (DIP)
(1) VPP 1 nCS
(2) Vdd 8 Vcc
(3) GND 4 Vss
(4) PGD 2 SO
(5) PGC 6 SCK
(6) AUX 5 SI
7 nHOLD - disabled (Vdd)
3 nWP - disabled (Vdd)
93LC Microwire bus devices:
Bus Speed-
~925kHz with Tools -> Fast Programming checked
~245kHz with Tools -> Fast Programming unchecked
Connections for 93LC devices
---------------------------------------
PICkit 2 Pin 93LC Device Pin (DIP)
(1) VPP 1 CS
(2) Vdd 8 Vcc
(3) GND 5 Vss
(4) PGD 4 DO
(5) PGC 2 CLK
(6) AUX 3 DI
7 PE - enabled (Vdd)
6 'C' Device ORG
Set to select word size