Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Need help on deciding what capacitors to pull first

Status
Not open for further replies.

Jeff262

New Member
I have a old board from a claw machine, input is 48vac and motor output should be 48dc then it starts the motor spike ar 48dc and immediately drop to 5v i some its bad capacitor. Where should I start with the larger or smaller ones, what ones normally fail faster? Thanks jeff
 

Attachments

  • 20201126_113511.jpg
    20201126_113511.jpg
    2.2 MB · Views: 202
Here's very few there anyway - do you have a scope to check the ripple on the capacitors?.

Failing that, I would suspect the largest one for such a major failure.
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top