need help building a pcb

I posted this questions to sci.electronics. already , but didnt get much of an answer,...

Can anyone tell me where to find information on how to manually install "vias" on a pcb. I have a board that was autorouted with Eagle (from Cadsoft) but it uses some vias. I have never used them before. I am only building one board.

If anyone knows how to do this or where to find "how-to's", please let me know!!!

Just to end the thread on this one,...i have decied to drill a #22awg sized hole where i need a via,...and put in the hole a piece of stripped #22 wire,...then solder both ends

try this soft trial

try this soft trial 30 days
**broken link removed**