Rajaneesh
Member
Re
Hi eric sir,
i connected the meter ref in neutral line with earth removed.
And i tried the second circuit with 12V DC relay. That also not working. I measured the voltage across the relay coil, it shows 0. So relay is not getting triggered.
Thanks
Hi eric sir,
i connected the meter ref in neutral line with earth removed.
And i tried the second circuit with 12V DC relay. That also not working. I measured the voltage across the relay coil, it shows 0. So relay is not getting triggered.
Thanks
ericgibbs said:Hi Rajaneesh,
I will post a circuit with the voltages you should get at different points on the circuit.
When you measured the 230V across the LED, where was the meter connected as reference?
Eric