skeeterb
Member
I'm currently working on a 4 zone alarm system and I want you guys to check it out and see what you think. I created it using FlowCode 4, and I've posted the C code for it on Pastebin.com @ https://pastebin.com/Er484fSt and I've attached the HEX file if you don't wish to look at the C code. Please look over the code and try it out and see if you can find any bugs. I've squashed as many as I could find, but I want to see if you guys can find any bugs that I may have missed. The uC is a PIC16F877. It uses 2 momentary push buttons @ A0 and A1 and 4 NC SPST switches connected to A2 - A5, a 2X20 LCD connected to Port B 6 LEDs connected to Port C, and a 4X3 Keypad connected to Port D.
Last edited: