Hi,
ive just built an interface cable for this radio and have got it to partially read, but when it gets to record 9, it stops and says ''error: type eva sp ? 0633''
has anybody got any ideas?
many thanks
Harley
Hi,
ok the diagram is from McMicro im using a 233mhz laptop running 98 and the cable is connected to the laptop via serial 9 pin.
hope this is of some use
many thanks
harley
Is the laptop a Pentium? Does it have USB ports or a true RS232 port?
You need quite a slow PC and running MSDOS. In the past I used an old 286 and it worked fine. However you may have problems with the fast Pentium's etc.....