Ah... 120 volt source.
Well that does rule out most 120 volt welders for any contiuous power!
What generator capacity do you have?
Even a 24 VDC 100 amp switching supply running at 90% efficency is still going to pull around 2700 watts. and factor in a good one with a 90% Pf is going to be at nearly 3 KVA or 25 amps input.
Well that does rule out most 120 volt welders for any contiuous power!
What generator capacity do you have?
Even a 24 VDC 100 amp switching supply running at 90% efficency is still going to pull around 2700 watts. and factor in a good one with a 90% Pf is going to be at nearly 3 KVA or 25 amps input.