mikroc pro direct to pic

ghostman11

Well-Known Member

• Dec 20, 2009

• #1

can you program the junebug directly from mikroc pro? or to put it another way how do you set up mikroc pro so that after you have wrote a program it compiles the code and programs the junebug directly?? this is probally a really noob question and i get the feeling your all gonna be laughing at me lol

 

ghostman11

Well-Known Member

• Dec 20, 2009

• #2

i have found under tools menu me programmer when i select usb show devices nothing is showing as connected to the usb any ideas?

 

D

dougy83

Well-Known Member

Most Helpful Member

• Dec 20, 2009

• #3

The junebug is a pickit 2 clone isn't it? If you run the pickit 2 software, it should be able to 1) detect it and 2) program it automatically after every build. There's a button on the pickit screen that you depress, select the hex file, and it will program the pic whenever the hex file changes

 

ghostman11

Well-Known Member

• Dec 20, 2009

• #4

i was trying to get it to program direct from mikro c seeing as i paid sooooo much for the program i have asked on the mikro c forum but they are no help

 

be80be

Well-Known Member

• Dec 20, 2009

• #5

You can use the pickit2 from the ide you need this https://ww1.microchip.com/downloads/en/DeviceDoc/PK2CMDv1-20.zip

 

ghostman11

Well-Known Member

• Dec 20, 2009

• #6

cheers be80be i will give it a go

 

ghostman11

Well-Known Member

• Dec 20, 2009

• #7

how exactly do i use this with mikro c?? is all new to me and i am a bit loast ok i am alot lost lol

 

be80be

Well-Known Member

• Dec 20, 2009

• #8

Well I did it with miKroC not the pro you add a tool and run set it to use the pickit2 cmd

 

ghostman11

Well-Known Member

• Dec 20, 2009

• #9

ok thanks i will give it a go in the morning