Microchip PIC Programmer -> 16C745/765 & 18F6720/8720

I allready have a post on this matter but nobody answers so here i come again to bug you hehe. I need a programmer for these pic's, because i allready have them, and they seem to be cool specially the 18F8720 great memory, speed, and C code support at MPlab, can you tell me of an serial or even parallel ( at this point it doesn't really mathers, i'm desperated ), that works with MPlab programmer software or that at least has some other that allow to do a good work :roll: :roll: :roll: .

Thanks Mates i hope that now someone sees this, er .
Bye!

PG2C programmer of olimex (see my signature), and ICPROG support your PICs.

I didn't program for them before, but I see it support. My PG2C work good with most of PICs.

Pls ask Nigel for his programmer. And you can use ICProg with his programmer, too.

You can program using ICSP, and you need a socket to connect to the PIC, because 18F6xx0 is in TQF package.

Hmm, the JDM interface thanks, i allready knew it but i didn't knew if i could use it and Mr. Nigel also wrote me that there is the ICProg wich support the 18FXX20 so thanks again.

Just one more question, i'm seeing that the JDM interface works ok for all the ICSP Pic's right since the programmer software recognises the device, yes ?

You can choose the chip with device options. Download ICPROG 105C and see how to work with it. JDM has a modified version, and another form is PG2C. However, I suggest you to use 16PRO40 of Nigel. Goodluck.

Thanks falleafd, Exo and Nigel also helped me on this as you did, i will build one compactible with ProPic2 that works with the ICProg.
Bye.