Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Register Log in
  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

MCU to MCU via i2c

Status
Not open for further replies.
TucsonDon

TucsonDon

Member
I am using a PIC18F46K22 as a master and a PIC18F45K22 as a slave. When I send a read request to the slave it produces an interrupt and sets the SSP1STAT R_nW bit on the slave, but what I am confused about is if the SSP1STAT D_nA bit is set by hardware or do I set in the software?
 
Status
Not open for further replies.

Similar threads

P
Which MCU for translating usb-midi to control LED lighting?
2
Replies
28
Views
7K
be80be
be80be
PG1995
  • Question
decimal digits, MCU 8051 IDE
Replies
14
Views
4K
Nigel Goodwin
Nigel Goodwin
A
  • Question
ASM: i2c software headache
2 3
Replies
58
Views
11K
augustinetez
A
DogFlu66
  • Question
Libraries for I2C (MSSP1), RTC DS1307 and EEPROM AT24C32 (Pic Basic Compiler Oshonsoft).
Replies
0
Views
706
DogFlu66
DogFlu66
G
  • Question
PIC16F877AA - NON-CONTACT THERMOMETER
Replies
9
Views
5K
rjenkinsgb
rjenkinsgb

Latest threads

New Articles From Microcontroller Tips

Back
Top