loop gain

Status
Not open for further replies.

Lucky-Luka

Member
Hi all
In the last few days I've tried to understand how to get loop gain of my amplifier circuit.
I've received several suggestion.
I would like to hear your opinion on this matter.
Are these 2 methods equivalent? Are they correct?
Cheers
 

Attachments

  • B.png
    32.8 KB · Views: 120
  • comparison.png
    129.5 KB · Views: 118
  • C.png
    33.6 KB · Views: 118
  • Vout_is_the_LOOP-GAIN.asc
    4.9 KB · Views: 74
You show a huge inductor and huge capacitor in the negative feedback parts I guess to provide DC negative feedback but block AC negative feedback?
Then you can measure the open-loop gain.

When you connect the negative feedback to measure the closed-loop gain then the phase shift is high and without frequency compensation with some Miller capacitance then the amplifier will be unstable with transients (high frequency ringing) or oscillation.
 
Status
Not open for further replies.

Similar threads

  • Question
How to eliminate ground loop noise from USB for microphone circuit
2
Replies
25
Views
6K
Fluffyboii
S
VOLTAGE GAIN AND VOUT RESISTENCE OF TRANSISTOR IN AC CIRCUIT
Replies
6
Views
2K
danadak
LLC switching bridge gain
Replies
1
Views
1K
rjenkinsgb
A
Gain difference going from LM358 to LM7322
Replies
10
Views
2K
ACharnley
A
phase locked loop as a frequency multiplier
2
Replies
20
Views
6K
PG1995
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…