Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Looking for stepper motor control and an output.

Status
Not open for further replies.

Brian1

New Member
I have this job of taking pictures of a single frame on film. So looking at using a stepper motor to advance the film one frame which should be a specific distance on each frame and constant. Then once the stepper motor stops trigger an output to make a switch that takes the picture. Then advance to next frame but may need to pause for a short period till image has been buffered out. trigger the output to take picture and advance to next frame. The picture software can be controlled off a USB foot pedal switch that I say is a simple device. Never cracked it open but guessing here on that it is a switch on the foot pedal.

Not looking at anything from scratch but a premade board with simply software to control a stepper motor and and output will be just fine. The picture software is always ready till foot pedal is pressed.

Thank you for your time and help.
Brian
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top