Looking for someone's assistance

I would like to hire someone to produce a strobe circuit for a 12V, 800mA, 9.6W LED. The driver I will be using is the RLDD015L-800. I also need the strobe speed to be continuously adjustable - but just a standard blink, nothing special.

From what I've read on the forums, a job like this is practically for children. Just let me know how much.

-Paul

The driver is not ideal for your needs.

Smells like a 555 feeding a P channel mosfet (N ch logic level ok too), with maybe a mosfet driver (MCP1406 etc) between pending max flash rate. I'll let somebody else take your money. <<<)))

What LED do you want to use.
Time on (blink)
Min and max time off.