# Looking for components

#### caseine

##### New Member
Hello, we are looking for components in any quantity.

Most wanted is STM32L496VGT6, TPS2553DRVR-1, LSM9DS1TR and GPS chip which is EOL and its name is Orion A38L. And also one connector from Molex which part name is 0734155300. Is there anyone who has it and doesn't need them?

#### ronsimpson

##### Well-Known Member
I looked through most sources and found nothing. Sorry. There are not many parts out there. I am looking at TI and "not this year". I may be out of work soon.

I am looking for AMC1311 or any opto isolator (analog or digital) what can with stand 75kv/uS. Found some fake ones at 10x the right price.

#### rjenkinsgb

##### Well-Known Member
I am looking for AMC1311 or any opto isolator (analog or digital) what can with stand 75kv/uS.
Only the AMC1311B has that rating; the non-B version is rated 15KV/uS - I can find quite a few similar devices which are available and can take that..

#### rjenkinsgb

##### Well-Known Member
Most wanted is STM32L496VGT6,
Newark claim they will have those in about three weeks, 2nd September, if that's any use?

#### ronsimpson

##### Well-Known Member
Only the AMC1311B has that rating; the non-B version is rated 15KV/uS - I can find quite a few similar devices which are available and can take that..
I need the 75kv/us. We are right there. I can find 25kv/us and may have to use them and see what happens.
At this pint I don't care if they are 2V input or 0.2 or 0.1. I can fix that with resistors. I can change other places to make up for the gain of 1, or 8 or 10.
I tried to change from analog to I2C isolation but some one grabbed the last of the 75kv/uS I2C isolators.

I found some isolators that appear to be relabeled just for me. " AMC1311B " but they look different, not TI parts.
If you can find any 75V/nS isolators I would love it.

#### ronsimpson

##### Well-Known Member
KeepItSimpleStupid
I have seen them in searches before but was scared to order. I ordered 10 at about 9x the normal price but I will take the risk.
Thanks.

#### KeepItSimpleStupid

##### Well-Known Member
I've had no problems with these guys. They are even quick to respond to RFQ's.

What's the NORMAL price now a days. Everything is messed up everywhere.

All of the "professionals" seem to be useless. My doc used the phrase "Anyone with 1/2 a brain would do _______". What they did implied that they had 1/2 a brain.

#### ronsimpson

##### Well-Known Member
I normally get the parts for $2.60 to$3.08. UTStore wants $25.82. I placed a small order to see if they are "fake parts". Now they tell me the price went up to$100.00 each. They need another $75 each. I don't want to spend$1000.00 + + and then find out the parts act strange. But I now know where they found the parts and I knew about them. So I am getting old boards back and removing the parts. If I have to use, used parts, better to pay for old outdated boards from companies I know then to pay some one I don't trust. I think the non-B parts are being relabeled B and the non-TI parts are being relabeled to TI. I only say this because I have been down this road before.

#### KeepItSimpleStupid

##### Well-Known Member
Some stuff is in short supply these days. One part can screw up an entire product.

There was a company a long time ago that sold removed IC's. They straighened the pins and re-plated them and possibly tested them. I think the company name started with a K.

I agree, old boards better than that price.

#### caseine

##### New Member
Thanks for the answers. We know the market situation, so I ask if anyone on the forum has these components and does not need them

#### ronsimpson

##### Well-Known Member
I am willing to trade. Any one can post that they need.

Replies
2
Views
1K
Replies
5
Views
3K
X
Replies
14
Views
6K
Replies
18
Views
2K
Replies
9
Views
5K