Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

LCD module

Status
Not open for further replies.

abhijitj

New Member
I got LCD module no.as ODM 16216 R/1 (16X2)manuf. by ORIOLE ELECTRONICS.
Please help to get its datasheet & its initialiazation.
 
Most 2X16 lcd's are very generic and uses the KS0066 conroller, try this data sheet:
**broken link removed**

and the init code in 8051 assembly:

Code:
lcd_init:		mov dptr,#6000H
		mov a,#38H 		;init. LCD 2 lines,5x7 matrix
        		movx @dptr,a
		call delay
        		mov a,#0CH   		;LCD on, cursor on
        		movx @dptr,a
		call delay
        		mov a,#01H   		;clear LCD command
        		movx @dptr,a
		call delay
        		mov a,#06H   		;shift cursor right
        		movx @dptr,a
		call delay
        		mov a,#0FH   		;cursor: line 1, pos. 6
        		movx @dptr,a
		call delay
        		mov a,#80H  
        		movx @dptr,a
		call delay
		ret
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top