MrDEB
Well-Known Member
Have a Komec 936 that I need to replace the hearter element BUT the element I purchased is for the Hakko 907 iron. Supposed to be same but want to maske sure. The Komec has a two colored wires and two clear wires attached to the element.
Using the Hakko 936 diagram pins 4 & 5 = 2.5 - 3.5 ohms
pins 1 & 2 = 43 - 58 ohms.
The ceramic element on the Komec iron is broken and need to replace.
Hope someone has a Komec936 and can double check if same.
Using the Hakko 936 diagram pins 4 & 5 = 2.5 - 3.5 ohms
pins 1 & 2 = 43 - 58 ohms.
The ceramic element on the Komec iron is broken and need to replace.
Hope someone has a Komec936 and can double check if same.