IR Fiber optics for PIC RS232

[MacroController]

Has anyone tried to use an IR to fiberoptic module to send RS232 data from/to either other controllers or to a PC serial port?

https://i-fiberoptics.com/pdf/IFE91D.pdf

There are some simple IR drivers/receivers that look like they would work but I wanted to see what others have tried.

 

[trash]

Yes, it's quite simple. Tandy/Radioshack used to have a kit for it which used cheapy plastic fibre just like the one you've described, not that I ever pushed it to 100MBps.
The best I ever did was send some video over it.
Simple OOK is all that is required to make it work. I used a simple high impedance gate using a 4069 to make the IR transistor drive the levels suitable (enough) for RS232.