I was suggested the topic 'interfacing USB to 8051 microcontroller' as my final year project...i would like to know whether it is actually possible to do so...and the time required for completing the project..(we are required to complete it in about 6 months)...i would also be grateful if you share any information regarding the topic with me.
I'll suggest the obvious of using a serial-USB bridge (e.g. ). This offloads all USB related management from the uC - the PC and 8051 communicate via a super simple serial interface (virtual serial over USB driver on PC and physical serial interface between the 8051 and FTDI chip).
This, of course, may not fulfill your assignment requirements.
I'll suggest the obvious of using a serial-USB bridge (e.g. ). This offloads all USB related management from the uC - the PC and 8051 communicate via a super simple serial interface (virtual serial over USB driver on PC and physical serial interface between the 8051 and FTDI chip).
This, of course, may not fulfill your assignment requirements.
Pavius gave U a G8 Idea of Using FT232,
I have also used the same and its very easy to use that. Otherwise U have to write a USB driver program in Microcontroller, thats not an easy task.
hello everyone
i m also involved in a similar project
but m nt aware of the FT232 and yes have u ppl ever worked with MTP805A?
i have started another thread for this discussion ..kindly help me this
thanks
mansi